click me!
  • DKDP Crystals for EO Applications
  • DKDP Crystals for EO Applications

DKDP Crystals for EO Applications

  • High Deuteration (>98.0%) DKDP Crystals
  • Broad Wavelength Range: 0.3~1.1μm
  • Maximum Aperture: 50mm
  • High Transmission: >98%
  • Cr-Au Electrode
Inquire Us  

Modules or Types:

A variety types of crystals are available upon your request:

  1. Crystal boules with inspection polishing
  2. Crystal blanks with inspection polishing
  3. Crystals with laser grade polishing
  4. Crystals with AR coating and Cr-Au electrode

 

Specifications:

Crystal Materials DKDP crystals (deuteration level >98%) Typical Diameter 6mm; 8mm; 10mm; 12mm; 15mm
Diameter Tolerance +/-0.1mm Length Tolerance +/-0.2mm
Surface Quality 20/10 S/D Parallelism <20 arc seconds
Flatness < Lambda/10 @633nm Chamfer 0.1-0.3mmx45°
Chips <0.15mm Fine ground <0.15mm
Orientation Tolerance  < 10 arc minutes Wavefront Distortion  <Lambda/8@633nm
Extinction Ratio >2000:1 Coating AR/AR@1064nm or customized
Damaging Threshold  >800mW/cm^2@1064nm 10nS 10Hz pulse Electrode on Side Surface Chrome gold electrode (Cr+Au)
Quarter Wave Voltage ~3.4KV

 

Physical and Optical Parameters:

Chemical Formula KD2P Curie Temperature 222K
Symmetry 42m Density 2.355g/cm3
Absorption 0.005/cm Extinction Ratio 1:10000
Deuterium Ratio 98.05%--99.05% Transmission Band 200-1600nm
Non-linear Coefficient d36=0.40pm/v Longitudinal Half-wave Voltage 2.98KV(I=546nm)
Electric Resistance >2x109Ω/cm Electric-optical Coefficient r41=8.8pm/v,r63=25pm/v

KD*P or DKDP crystals are widely used in Q-switching applications at wavelength range from 0.25µm to approximately 1.1 µm,If the deuterium content is higher the absorption edge of the material is shifted further into the infrared. KD*P crystal with a deuterium content >98% can be used up to 1.3μm. KD*P can be grown with high optical uniformity and is therefore recommended for large apertures. 

Hangzhou Shalom EO offers the DKDP crystals of high deuteration (>98%) for KD*P pockels cells applications, the customized blanks, polished crystals and the AR coating and Cr-Au electroded crystal components are available upon your request. 

TeO2 Crystals for AO application

TeO2 Crystals for AO application

  • High figure of merit 
  • High refractive index
  • Applications: AOM (acousto-optic modulators), AOD (acousto-optic deflectors), AOTF (acousto-optic tunable filters), Laser Q-switches and RF spectrum analyzers
...

LiNbO3 Z-Cut, 9x9x25mm, Rectangular, Au electroded for EO applications

LiNbO3 Z-Cut, 9x9x25mm, Rectangular, Au electroded for EO applications

Code: 2043-002

...

MgO:LiNbO3 Crystals for EO Applications

MgO:LiNbO3 Crystals for EO Applications

  • Low Half Wave Voltage
  • High Electro-Optical Coefficients
  • Brewster for laser of low amplification
  • Higher Damage Threshold than none doping LiNbO3
  • Preferable for Er:YAG, Ho:YAG and Tm:YAG lasers
...

DKDP (KD*P) Crystals

DKDP (KD*P) Crystals

  • For Variety applications: SHG, THG, 4HG and EO pockels cells
  • Maximum size: 100x100x60mm
  • The DKDP crystals blanks available
  • Strict QC and high quality crystals
...

Aperture 10mm, 1064nm, DKDP Pockels Cells

Aperture 10mm, 1064nm, DKDP Pockels Cells

Code: 2031-002

...