|Aperture Size||ɸ10mm||Extinction Ratio||<5x10-6|
|Angular Field||>6°||Surface Quality||20 / 10 S/D|
|Parallelism||<1 arc Min||Beam Deviation||< 3 arc minutes|
|Wavefront Distortion||λ /4@633nm||Damage Threshold||>500 MW/cm2|
|Coating||Single MgF2||Mount||Black Anodized Aluminium|
Glan Laser prism polarizer is made of two same birefringent material prisms that are assembled with an air space. The polarizer is a modification of the Glan Taylor type and is designed to have less reflection loss at the prism junction. The polarizer with two escape windows allow the rejected beam to escape out of the polarizer, which makes it more desirable for high energy lasers. The surface quality of these faces is relatively poor as compared to that of entrance and exit faces. No scratch dig surface quality specifications are assigned to these faces.