click me!
  • GOS (Gd2O2S:Pr) Scintillator Arrays
  • GOS (Gd2O2S:Pr) Scintillator Arrays

GOS (Gd2O2S:Pr) Scintillator Arrays

  • Relatively High Light Output and High Density,Good Machinability
  • Low Afterglow less than 0.1% at 3 ms and Excellent Moisture Resistance, goodchemical stability
  • Well matched with the spectral sensitivity of silicon photodiodes (Si PD)
  • Emission peak spectral range at 470 ~ 900 nm
  • Minimum pixel or crystal element size : 0.3mm x 0.3mm
  • Applications:Computerized Tomography (CT) Scanners, security devices and non-destructive testing systems
Inquire Us  

Basic Properties:

Density(g/cm3) 7.34 Atomic Coefficient 60
Peak Wavelength (nm) 510 Light Output (ph/Mev) 27000
Decay Time (μs) 3 Afterglow <0.1% at 3 ms
Hydroscopic None

Gadolinium oxysulfide or GOS (Gd2O2S:Pr) is a kind of ceramic with a hexagonal system structure, it has good chemical stability and machinability and is harmless to the environment. GOS doped with rare earth ion has a relatively high light output and extremely low afterglow, which is less than 0.1% at 3 ms. GOS scintillator ceramic has an emission peak spectral range at 470 ~ 900 nm, which is well matched with the spectral sensitivity of silicon photodiodes (Si PD).

Hangzhou Shalom EO offers the GOS scintillator arrays, with linear or two-dimensional designs. Our GOS scintillation arrays are widely used in Computerized Tomography (CT) Scanners, security devices and non-destructive testing systems. If you demand, Shalom EO also GOS scintillation arrays coupled with silicon photodiodes

X-ray excited luminescence spectrum of GOS ceramic of Hangzhou Shalom EO



Scintillation Detection Arrays (Coupled with Si PDs)

Scintillation Detection Arrays (Coupled with Si PDs)

  • Linear Scintillation Array + Monocrystalline Si Photodiode Array + Mounting Board
  • Element size width 1.4mm, height 2.5nm, with element pitch of 1.575nm
  • Modules of 16 elements, 64 elements, and 128 elements are available
  • Wide spectral range of 350-1100nm (responsitivity peak at 950nm)
  • A variety of scintillator materials including CsI(Tl), GOS ceramic, CdWO4, or other custom choices
  • Dual energy inspection is enabled when combining a CsI(Tl) detector for high energy and GOS detector for low energy
...