Optical Grade LiTaO3 Crystal Wafers

Diameter: 2”,3”
Minimum thickness: 0.05mm
Crystals ingots, blanks, off-the-shelf and customized wafers available
No surface defects (no edge cracks, scratches, saw marks, stains)
Applications: electro-optical modulator, optical fiber communications applications

Code	Material	Diameter	Thickness	Orientation	Surface Finish	Unit Price	Delivery
632-001	Optical LiTaO3	Φ76.2mm	0.35mm	X-cut	DSP	Inquire	Inquire
632-002	Optical LiTaO3	Φ76.2mm	0.35mm	Z-cut	DSP	Inquire	Inquire
632-003	Optical LiTaO3	Φ76.2mm	0.5mm	X-cut	DSP	Inquire	Inquire
632-004	Optical LiTaO3	Φ76.2mm	0.5mm	Z-cut	DSP	Inquire	Inquire
632-005	Optical LiTaO3	Φ100mm	0.35mm	X-cut	DSP	Inquire	Inquire
632-006	Optical LiTaO3	Φ100mm	0.35mm	Z-cut	DSP	Inquire	Inquire
632-007	Optical LiTaO3	Φ100mm	0.5mm	X-cut	DSP	Inquire	Inquire
632-008	Optical LiTaO3	Φ100mm	0.5mm	Z-cut	DSP	Inquire	Inquire

Lithium Tantalate (LiTaO3), referred to as LT, is a crystal with a perovskite structure. LiTaO3 exhibits distinguished optical, piezoelectric, and pyroelectric properties. For different applications, the critical parameters of LITaO3 differ. Optical grade LiTaO3 crystal wafers boast a unique set of properties that make them ideal for optical applications. Optical grade LiTaO3 exhibits high optical transmission across a broad spectrum, spanning from ultraviolet to near-infrared wavelengths. The strong electro-optic effect of LiTaO3 allows for efficient modulation of light with low drive voltages, enabling the manipulation and modulation of optical signals for data communication and signal processing. In addition, LT possesses consistent optical characteristics throughout its volume and low optical absorption, facilitating efficient light transmission with minimum distortions, aberrations, or other undesirable effects.

Hangzhou Shalom EO offers optical grade lithium tantalate (LiTaO3) crystal ingots, blanks, wafers, and substrates, both off-the-shelf and custom products are available. Advanced facilities are equipped for crystal growing, wafer cutting, lapping, and polishing. Before shipping, a stringent testing process is taken under our ISO9001-certified QC system.

Specifications:

Material	Optical Grade LiTaO3
Curie Temp	603±2℃
Cutting Angle	X/Y/Z etc
Diameter/Size	2”/3”/4”
Tol(±)	<0.20 mm
Thickness	0.18 ~ 1.0mm or more
Primary Flat	16mm/22mm /32mm
Orientation Flat	All available
Surface Type	Single Side Polished /Double Sides Polished
Polished Side Ra	<0.5nm
Back Side Criteria	General 0.2-0.5μm or as customized
Surface Quality	20/10 S/D
Edge Criteria	R=0.2mm or Bullnose
Wafer Surface Criteria	Contamination	None
	Particles ￠>0.3 µm	<= 30
	Scratch , Chipping	None
	Defects	No edge cracks, scratches, saw marks, stains

Optical Grade LiTaO3 Crystal Wafers

Optical Grade LiTaO3 Wafers D100x0.35mm X-cut DSP

Optical Grade LiTaO3 Wafers D76.2x0.5mm X-cut DSP

Optical Grade LiTaO3 Wafers D76.2x0.5mm Z-cut DSP