click me!
  • Aperture 2.5mm 1064nm LiNbO3 and MgO:LiNbO3 Pockels Cells
  • Aperture 2.5mm 1064nm LiNbO3 and MgO:LiNbO3 Pockels Cells

Aperture 2.5mm 1064nm LiNbO3 and MgO:LiNbO3 Pockels Cells

Code: 2033-001


Inquire Us  

Specifications:

Clear Aperture 2.5mm
Wavelength 1064nm
Dimension 55x28x24mm
Crystal Size 3x3x25mm
Electrodes on crystal Au/Cr
Extinction Ratio@1064nm >500:1
Wavefront Distortion <λ/8@632.8nm
Quarter Wave Voltage ~885V@1064nm
Insertion loss <3%
Capacitance <5pF
Damaging Threshold 200MW/cm^2 Homogeneous intracavity laser light beam with no hot point

This module of LN Pockels cells is made from near-stoichiometric LiNbO3 or MgO:LiNbO3 crystals. Cylindrical shaped housings could be customized, we also provide products with damage threshold higher than 200MW/cm^2 (Just contact us and we could modify the structures and parameters according to your requests).

Hangzhou Shalom EO offers the pockels cells made from LiNbO3 crystals and MgO:LiNbO3 crystals, with aperture size of 2.5mm to 9mm. The LiNbO3 and MgO:LiNbO3 crystals with Cr-Au electrode for electro-optical modulators or pockels cells are also offered.


Side physical effcets of Pockels cells:

When it comes to practical applications of Pockels cells, one may need to take some additional side effects into account:

  • Etalon effects may still exists and affect the optical performance if the beam direction is perpendicular to the faces of crystal, Even when the end faces of the crystal are coated with high-quality AR coatings.
  • Temperature could significantly affect the obtain phase changes.For example, a Pockels cell which is set to generate perfect high-contrast amplitude modulation, may require readjustments of the operation voltages when the temperature changes. However there are thermally compensated double crystal designs may circumvent the problem.
  • For operation with large beam radius, it is worth paying attention to sort out an optimized design for electrodes (possibly with additional auxiliary electrodes for high uniformity of the generated electric field, as otherwise one may obtain a spatially varying modulation).
  • Nonlinear crystals often exhibit substantial piezo-electric and elastooptic effects, which can have substantial influences on the performance at high modulation frequencies.
  • Operating at high power levels, thermal effects may be induced by residual absorption of the crystal . Therefore materials with lower absorption are preferable for high power applications
  • The crystals used in Pockels cells are nonlinear crystal materials, they inherently demonstrates considerable optical nonlinearities. For instance, self-phase modulation and nonlinear self-focusing might occur for light pulses with substantial peak power.
1064nm
55x28x24mm
2.5mm
>500:1
200MW/cm^2
Inquire
Inquire